Gecko in.xe User Manual

10
in.xe TechBook
For 240 V (4 wires)
Correct wiring of the
electrical service box,
GFCI, and pack terminal
block is essential.
Call an electrician
if necessary.
in.xe.ce 230 V
or 230/400 V
Correct wiring of the
electrical service box,
RCD, and pack terminal
block is essential!
Call an electrician
if necessary.
For 120 V (*3 wires)
*If connected to a 3
wire system, no 240 V
component will work.
Refer to "Connections
for 120 V heater" section
of this manual.
Electrical wiring North American model in.xe
Electrical wiring European model in.xe.ce
Single-phase Dual-phase
Warning!
in.xe.ce models must
always be connected
to a circuit protected
by a Residual-Current
Device (RCD) having
a rated operating
residual-current not
exceeding 30 mA.

Gecko in.xe Specifications

General

Blower Output	1
Ozone Output	1
Light Output	1
Dimensions	Varies by model
Weight	Varies by model
Warranty	Varies by manufacturer
Power Supply	240V
Keypad Compatibility	in.k200, in.k300, in.k35, in.k4, in.k450, in.k500, in.k600, in.800 Auxiliary Keypads: in.k100