Gecko in.xe User Manual

4
in.xe TechBook
The in.put was designed to ease wire insertion
(up to # 4 AWG) and connections. Tighter input
connection reduces heat generated for increased
component lifetime.
in.put
input terminal block
The in.seal provides an extra level of protection
against water infiltration. Connectors and
power box are designed to be watertight so no
water can be in direct contact with electrical
components (IPX-5).
in.seal
watertight protection
A heater safety system located on the heat.wav
heater with an all-electronic dry-fire protection.
in.flo
dry-fire protection
in.t.cip is an intelligent water temperature refresh
algorithm that calculates optimal time to start
pumps and get water temperature readings.
in.t.cip continuously readjusts the heater start time.
in.t.cip
water temperature algorithm
Features
The in.xe system boasts a long list of technical features. Each of them contributes to bringing the most advanced
solutions available to in.xe equipped spa owners:
Electronic components are placed into separate
and inaccessible compartments. Only serviceable
parts are made accessible to service technicians.
in.axess
board access prevention
First ever UL approved kinetic heating protection
manages water temp increase generated by pump
heat dissipation. Hardware protection shuts all
accessories off if it senses water overheating.
in.kin
kinetic heat monitoring
The in.stik is a pen drive with an in.link
connector very similar to a USB memory stick.
It connects to the spa pack and contains data
to program or configure its system. The system
executes the data upload automatically.
in.stik
automated software upload
in.link cables are output and input plugs and
connectors that come with colored and tagged
polarizers. Totally waterproof, they are designed
to be easily configured and to ensure that all
cables of equipment used to make a spa or hot
tub work properly are well connected at their
intended connection port, eliminating any risk of
miswiring.
in.link
ingenious plugs and connectors

Gecko in.xe Specifications

General

Blower Output	1
Ozone Output	1
Light Output	1
Dimensions	Varies by model
Weight	Varies by model
Warranty	Varies by manufacturer
Power Supply	240V
Keypad Compatibility	in.k200, in.k300, in.k35, in.k4, in.k450, in.k500, in.k600, in.800 Auxiliary Keypads: in.k100