12
in.xe TechBook
in.link connectors
The in.xe features in.link connectors with colored
and tagged polarizers. This new plug and connector
technology has been specifically designed for easy and
safe assembly. The tags are interchangeable depending
on the output; the polarizers are designed to avoid
misconnections.
In.link connectors are easily and conveniently accessible
from the front of the pack offering a wide range of
possible connection configurations. In.link connectors
come in 3 sizes (HC, LC and low voltage) for all types of
inputs and output devices.
High Current
Integrated latch
Low Current
Low voltage
Colored & tagged
polarizers
Latch snap & strain
relief
A latch mechanism is
provided to maintain male
and female connectors
together. The tab provided
on the male part gives
the operator an audible
and tactile feedback at
the insertion of the cable
in the female part. Once
the latch is engaged, it will
prevent both parts from
separating unintentionally
by vibration or shock.
To unplug the male
connector, a gentle press
on the tab will allow the
release of the locking
mecha-nism to separate
both parts.
Watertight design
UL & CE
The female connector
comes with a built-in
seal ensuring a watertight
connection assembly
sealed from moisture and
water ingress. This sealing
is intended to be suitable
for the North American
and European standards
and the demanding
spa environment.
To Next Page
Loading...
Need help?
General
