CLEANING
6
Insect disposal and general maintenance
Ensure the Bionic Trapper is disconnected from the mains supply before performing any cleaning or
maintenance.
Detach basket at base by twisting it in the anti-clockwise direction and remove it from the trapper unit. It is
recommended that a small sealable plastic bag be used for the transfer of the basket’s contents, to ensure
any live insects cannot escape during disposal.
Remove snap-in funnel from basket to empty out captured insects from the basket.
Reassemble the funnel and basket, reposition the basket at the base of the Trapper and twist in a
clockwise direction until the basket is locked into position. Ensure the basket is securely fastened to the
trapper unit by pulling it lightly.
The Bionic Trapper may be wiped clean with a dry or slightly damp cloth, do not use water or solvents to
clean any part of the unit. Ensure the unit is completely dry before connection to the mains supply.
Capture basket with no-escape funnel
Underside of Trapper with capture basket removedOpen and remove capture basket
Funnel removed