Note:
With the in.k500 equipped with a selectable rim
light color modul: If the "RGB backlight" option
is enabled in the spa configuration an option will
appear to allow selection of the keypad rim light
color.
About
This section shows information about the in.k500
software number, and the revision numbers
of the different components of your system.
Maintenance reminders (
version 7.00 and higher)
The in.k500 keypad will remind you of maintenance
required on your spa, like rinsing or cleaning the
filter.
Each task has its own duration, based on normal use.
The Maintenance reminders menu allows you to
verify the time left before maintenance is required,
as well as to reset the time once a task is completed.
Use the Up and Down keys to move through the list.
To reset a task select it by pressing Light key,
then confirm when prompted . Once you have
confirmed the task will be reset.
Standby (
version 6.00 and higher)
The Standby mode allows you to service your spa .
Pumps will stop for 30 minutes, and automatically
restart after this time.
Once Standby mode has been activated a screen
will appear to show that pumps are stopped. The
normal spa page will return at the end of
maintenance.
Press on the Light key to leave Standby mode and
restart the spa.
Note: In version 6.00 only, Standby mode is
accessible directly from the Settings page.
Date and time
Here you can adjust the time format, change the
year, date and time. Use the arrows to choose the
setting that you want to adjust, and select it by
pressing the Light key. Use the arrow buttons to
change the parameters, and the Light key to move
between parameters.
Key 1 will take you back to the main Settings menu.
Note: In version 6.00 and earlier, only the day of
the week can be changed, and not the year or date.
Keypad settings
In this section you can change the temperature unit
and language. Use the arrow keys, and move to the
setting that you would like to change. Use the Light
key to choose and the arrow keys to modify.
Starting in version 7.00 you can change the display
orientation. When changed, the contextual options
and arrow keys adjust to the chosen orientation.
The Mode and Menu keys remain unchanged, as
well as the accessory keys in the main spa menu.
To Next Page
Loading...
Need help?
General
