Geckodrive G201 - G201 A Specifications; Drive Physical and Electrical Specs

6
G201 STEP MOTOR DRIVE
REV 16: August 6, 2009
SPECIFICATIONS
Supply Voltage: 24 to 80 VDC
Phase Current: 1 to 7 Amps and 0.3 to 2 Amps (2 ranges)
Auto Current Reduction: 33% of set current, 1 second after last Step Pulse
Size: 2.5”W, 2.5”D, .85”H (63.5mm, 63.5mm, 21.5mm)
Mounting Pattern: 4 6-32 screws, 1.75” by 2.375” (44.5 mm, 60 mm)
Quiescent Current: 15 Ma or less
Weight: 3.6 oz. (100 gm)
Step Frequency: 0 to 200 kHz
Step Pulse “0” Time: 0.5 uS min (Step on falling edge)
Temp: 0 to 70 C
Step Pulse “1” Time: 4 uS min
Humidity: 0 to 95 % (non-condensing)
Direction Setup: 1 uS min (20 uS min hold time after Step edge)
Power Dissipation: 1 to 18 W (1 to 7 Amps)
Geckodrive Inc. Phone: 1-714-832-8874
14662 Franklin Ave Fax: 1-714-832-8082
Suite E Web Site:
www.geckodrive.com
Tustin, CA 92780
2.3750"
2.5000"
1.7500"
2.5000"
.197"/.200"
0.1500"
0.8250"
0.5000"
2.1500"
(54.6 mm)
(60.3 mm)
(21 mm)
(3.8 mm)(5 mm/5.08 mm)
(63.5 mm)
(63.5 mm)
(44.5 mm)
(12.7 mm)
0.125"
(3.2 mm)
Aluminum, Anodized
Aluminum, Hard Anodized
Color: Black, Yellow Text
Plate:
Cover:
Weight:
Size:
3.6 oz (100 gm)
2.5" X 2.5" X 0.825"
(63.6 X 63.5 X 21 mm)
G201A 10 uStep Drive