10
switch is in the u
pper (ON) state, it means that the vehicle can be operated.
When the main switch is in the down (OFF) position, this means that the power is switched off, the
vehicle can not
be operated.
9)
Parking brake
(1)
Parking brake (to the right of the driver's seat)
Parking State: When the vehicle is parked, pull up the parking brake lever so that it is in state 1 and confirm
whether the parked vehicle is valid. Do not start the vehicle if the parking brake lever is not put down, otherwise
damage to the vehicle parts will occur.
Dissolving the parking state: Before driving, check that the parking brake lever is released. Get the vehicle
ready for operation: hold the brake lever, press the button at the top and place it down as in state 2.
Caution: The vehicle can only move when the parking brake is unlocked.
To Next Page
Loading...
Need help?
General