28
a. Press the gear lever to "N" (Neutral), pull up the parking brake and turn off the ignition switch.
b. Do not turn the ignition key to ON to avoid discharging the battery. Also, be sure to remove the key
and take it with you.
4. Parking
a. Pull up the parking brake lever and do not press the lever button currently.
b. Make sure you fully release the parking brake lever before driving. The specific method is to hold the
lever button and release the parking lever downwards.
Warning:
Driving with the parking brake applied can overheat the brake parts and the engine, affecting braking
performance and increasing brake wear. In severe cases, the engine may burn out.
Warning:
Try to tighten the brake lever when parking, especially on a slope.
5. Shifting
To drive the vehicle forward, press the gear selector switch to "FOR". To drive the vehicle backwards, press
the gear selector switch to "BACK". Note that to ensure the life of the engine, the controller has already the
appropriate protection integrated. Only when the vehicle is parked the gear switch to "FOR" or "BACK" is
possible.
a. When the gear switch is in "N" (Neutral) position, the drive motor is activated.
b. Do not run the drive motor at high speed when the vehicle is stopped.
and the gear lever set to "FOR" or "BACK".
To Next Page
Loading...
Need help?
General