21
a.
Open the protective cover counterclockwise above the rear light.
b.
Plug one end of the
self-supplied charging gun (Figure 1) into the public charging socket (Figure 2) and
then plug
the other end of the charging gun into the vehicle's charging port. Make sure the charging gun is in
place to ensure a reliable connection. Then switch on the power and start charging the electric vehicle.
c.
When the indicator light on the charging stack (Figure 2) shows that charging is complete, first disconnect
the charging gun plug at the vehicle end and then disconnect the charging plug connected to the charging stack.
Close the dust cover of the charging port and the protective cover of the vehicle charging socket. Then place
the charger in the special storage box.
B2. Charging procedure with a public AC charging stack without charging gun:
To Next Page
Loading...
Need help?
General