16
EN
3.4 Tightening Screws
WARNING
OVERLOAD HAZARD
The torque wrench can be overloaded during use and break
as a result. This might cause SERIOUS INJURY or DEATH.
Always use original accessory parts ONLY. When using
accessory parts not approved by the manufacturer there is
also the risk that they will not bear the loads.
Check the torque wrench for damage prior to EVERY
application.
NEVER use the torque wrench if it has been dropped or has
struck against other objects or objects have fallen on the
torque wrench.
ALWAYS release the torque wrench IMMEDIATELY on the
sound of a click.
WARNING
FAULTY TIGHTENING TORQUE HAZARD
An uncalibrated torque wrench can cause screw connections,
the torque wrench and accessories to fail and produce faulty
screw connections. This might cause SERIOUS INJURY or
DEATH.
Always use tested and calibrated torque wrenches ONLY,
see section 4.1. Always use tested torque testing equipment
ONLY.
To Next Page
Loading...
