HOW TO USE
11
Once the desired frothing has been achieved, the steam nozzle must be pushed
deeper to heat the milk well.
6.
Once the desired result has been achieved, close the Steam Control Knob, by
rotating it clockwise, to stop dispensing steam and remove the jug.
7.
Tips: It is advisable to always keep a hand on the rounded part of
the jug to feel the temperature increase of the unfrothed milk.
Tips : To make the froth more compact, it is advisable to lightly tap
the jug on aflat surface after frothing.
Rotate the Steam Control Knob counterclockwise to let the steam come out.5.
Note : The steam pressure increases as the knob is rotated.
The entire operation should last no longer than 60 seconds.
To froth the milk correctly, the steam nozzle must always be in
contact with the milk and not with the froth. Therefore, as the layer
of froth increases, the jug must be slightly raised trying to keep the
nozzle in contact with the milk, without touching the bottom of the
jug.
8. Press the Steam Button to OFF. Pour the frothed milk into the coffee.
Warning : The Steam Wand may be very hot during and after
use. To avoid burns, move it only by placing your fingers on the
rubber tip fitted on the Steam Wand.
To Next Page
