24
Standby Mode
When the telephone is ready for use and you have not
entered any characters, the telephone is in standby
mode. You can set the telephone to standby mode by
pressing .
Making a Call
Flip open the cover and dial the number on the
keypad.
Press CLEARsoft key to delete an incorrect digit
Press , the number is automatically dialled
To end the call simply press
To place an international call you need to press + before
the country code. Simply, press * key twice. Some
foreign telephone networks have extension lines that
cannot be dialled as dial-through, but need to be entered
by the keypad. To dial these directly, press * quickly three
times in a row after the telephone number. The p
character will appear and then you can enter the
extension.
To Next Page
