37
The numeric keypad also has characters printed on the
keys. These characters are used for entering text for
the purposes of phonebook entry and modification, SMS
text writing and searching for an entry in the phonebook.
Press each key the relevant number of times to get the
letter you need e..g. to get the letter J, press the 5 key
once, to get the letter S, press the 7 key four times in
quick succession.
To move on to the next letter, wait a few seconds and the
cursor will appear | after the last letter you entered. You
may now enter the next letter. To switch between upper
and lower case use the key. You can also switch
to numbers using key. The input mode will be
indicated on the right hand side of the name entry field
indicated by a pencil..
Press 0 to insert a space.
Press the CLEAR soft key to delete the last character
typed in while entering a number or a name. Press and
hold the CLEAR soft key to clear the screen.
To Next Page
Loading...
