EasyManua.ls Logo

Geemarc CL8600 - Switching On;Off

Geemarc CL8600
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Charging the Battery
Charging via the Type-C Port
Plug the charger into a wall socket.
Connect the lead from the charger
into the Type-C port on the bottom
of the telephone. During charging,
the battery icon
starts to fill.
Charging via the Charging Unit
Plug the charger into a wall socket.
Connect the lead from the charger into
the Type-C port on the charging unit.
Place the mobile telephone onto the charging unit.
Note: Only use batteries and
chargers supplied with the
telephone. The guarantee will
be invalid if an unapproved
cable is used. Keep the battery
contacts clean and free of dirt.
Try and avoid removing the
battery as this could short circuit
the battery.
If the battery is completely discharged, it may take a few seconds
before the charging indicator appears on the display or before
any calls can be made.
Before the handset is first used, the battery must be
charged for a minimum of 3 hours.
SETTING UP

Table of Contents

Related product manuals