1110
STEP 1.
In the Geeni app, on the top
corner of the Devices screen,
click (+).
Choose “Video Camera“.
STEP 2.
Make sure the indicator light on the
device is blinking Red, indicating the
device is ready to connect. If not, follow
instructions to Reset the device so that
indicator light is blinking red,
then press “Next Step”.
STEP 3.
Enter your Wi-Fi network and
password.
*If the connection fails, try to reset and connect directly using QR Code Mode.
STEP 4.
The Geeni app will try to connect
your device.
During this time, the camera will
beep, continue blinking Red, and
then turn solid Blue.
6 Add device. Method 1: Easy Mode
NOTE: Geeni can’t connect to 5GHz networks.
To Next Page
Loading...