1312
QR Code
STEP 1.
Make sure the device is blinking red.
(see reset instructions on p. 9)
STEP 2.
In the Geeni app, on the top corner
of the Devices screen, click (+).
Choose “Video Camera“.
Choose “QR Code” in the top corner.
STEP 3.
Click Next and enter your
Wi-Fi details.
STEP 4.
Scan the QR Code with the
camera.
STEP 5.
If you heard the camera beep,
press “I heard the beep“ and it will
add your camera.
7 Add device. Method 2: Backup QR Code Mode
To Next Page
Loading...