Need help?Do you have a question about the Gefen EXT-DVI-2500HD and is the answer not in the manual?
General| Category | Extender |
|---|---|
| Model | EXT-DVI-2500HD |
| Type | DVI Extender |
| Signal Type | DVI |
| Maximum Resolution | 1920x1200 |
| Video Amplifier Bandwidth | 1.65 Gbps |
| Link Connector | RJ-45 |
| Power Supply | 5V DC |
| Cable Type | CAT5e or CAT6 |
| Input DDC Signal | 5 volts |
| DVI Connector | DVI-I 29-pin female |
| Power Consumption | 10W (max) |
| Operating Temperature | 0 to +45 °C |
| Input | DVI-D |
| Maximum Distance | 2500ft (762m) |
Diagram and labels of the Sender unit's front interface.
Diagram and labels of the Sender unit's rear interface.
Diagram and labels of the Receiver unit's front interface.
Diagram and labels of the Receiver unit's rear interface.
Transmits DDC2B and EDID over CAT-5e; supports HDCP up to 330 feet.
Records EDID; extends up to 6,600 feet; does not support HDCP.
Explains fiber optic cable requirements for Single-Link and Dual-Link connections.
Instructions for registering the product online via the Gefen website.
To Next Page