Need help?Do you have a question about the Gefen EXT-UHD600A-88 and is the answer not in the manual?
General| RJ-45 input ports | 1 |
|---|---|
| HDMI input ports quantity | 8 |
| Display type | OLED |
| Built-in display | Yes |
| Display number of lines | 2 lines |
| Display number of characters | 20 |
| Control type | Buttons |
| Rack capacity | 2U |
| AC input voltage | 24 V |
| Storage temperature (T-T) | -20 - 85 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Cables included | AC |
| Product type | AV matrix switcher |
| Maximum TMDS clock | 600 MHz |
Weight and Dimensions| Depth | 400 mm |
|---|---|
| Width | 440 mm |
| Height | 89 mm |
| Weight | 9600 g |
| Package weight | 13250 g |
Highlights the importance of cable quality for 600 MHz HDMI signals and recommends specific Gefen cables.
Details the items included in the product package, such as the matrix, power supply, remote, and accessories.
Describes the function of each control and indicator on the matrix's front panel.
Details the various ports and connections available on the rear panel of the matrix.
Explains the functions of the buttons on the included IR remote control.
Provides step-by-step instructions for inserting batteries into the IR remote control.
Guides users on how to set the IR channel for communication between the remote and the matrix.
Details how to connect video, audio, IP, RS-232, IR, and power sources to the matrix.
Illustrates the typical system setup and connectivity for the matrix.
Explains how to configure the matrix's network settings using the Gefen Syner-G application.
Instructions on how to power the matrix on and off using the front panel or IR remote.
Describes how to check the current input-to-output routing configuration displayed on the screen.
Step-by-step guide for routing specific inputs to desired outputs using the front panel.
Explains how to set the audio output mode to variable or fixed via the menu system.
Details how to send an HPD pulse to an input to re-initialize the HDMI link.
Explains how to restrict HDCP versions accepted by inputs or set output HDCP behavior.
Guides on selecting the EDID mode (internal, external, custom) for each input.
Instructions for setting the IP mode, IP address, subnet mask, gateway, and HTTP port.
Covers TCP access, port configuration, and Telnet welcome message settings.
Details how to enable/disable UDP access, set UDP ports, and configure remote UDP settings.
Explains how to enable or disable the 'discovery' feature for network identification.
Describes how to enable or disable RS-232 feedback for command responses.
Instructions on how to change the brightness of the front panel LCD display.
Guides on setting the matrix's IR channel to match the remote control's channel.
Procedure for resetting the matrix to its original factory-default settings.
Instructions on how to restart the matrix through the menu system.
Overview of the built-in web interface for managing matrix features.
Explains how to lock the matrix controls through the web interface to prevent accidental changes.
Describes how to view the current input-to-output routing status on the web interface.
Details on how to perform input routing and output masking through the web interface.
Instructions on creating, editing, and recalling routing presets using the web interface.
Explains how to view detailed status information for inputs and outputs on the web interface.
Guides on renaming inputs and outputs through the web interface for easier identification.
Details how to configure audio output modes (Fixed/Variable) for each output on the web interface.
Explains how to send HPD pulses to inputs via the web interface for HDMI link re-initialization.
Instructions on managing HDCP pass-through or rejection for inputs and outputs via the web interface.
Guides on setting EDID modes (internal, external, custom) for each input via the web interface.
Details on how to use custom EDID settings for inputs via the web interface.
Instructions on copying EDID data from sources to inputs using the web interface.
Explains how to download EDID data to a computer and upload EDID files to inputs.
Guides on setting network parameters like IP address and HTTP port via the web interface.
Details on enabling/disabling TCP access, setting ports, and managing login messages via the web interface.
Instructions on configuring UDP access, ports, and remote UDP settings via the web interface.
Explains how to change administrator and operator passwords for web interface access.
Details on enabling discovery, finding devices, and setting read-only or read/write modes.
Covers settings like RS-232 feedback and LCD brightness adjustment via the web interface.
Instructions on downloading and applying firmware updates to the matrix using the web interface.
Guides on setting the matrix's IR channel to match the remote control via the web interface.
Procedure for performing a factory reset using the web interface, preserving IP settings.
Instructions on restarting the matrix using the web interface.
Steps for establishing a Telnet connection to the matrix for command-line control.
Details on configuring UDP access and ports for control system integration.
Settings for configuring the RS-232 port for communication with automation devices.
Lists commands related to discovering the matrix and its status on the network.
Lists commands to retrieve HDCP, HPD, video mode, and signal status for inputs.
Lists commands for managing EDID data, including custom, copy, lock, and mode settings.
Lists commands for retrieving and setting network parameters like IP, gateway, and ports.
Lists commands to retrieve HDCP, HPD, video mode, and Rsense status for outputs.
Lists commands for retrieving and setting preset names and recalling presets.
Lists commands for getting/setting mask status, locking the matrix, and performing routing.
Lists commands for audio output mode, input/output HDCP, and I/O naming.
Lists commands for factory reset, firmware version, IR channel, and LCD brightness.
Lists commands for getting and setting audio mute and volume levels for outputs.
Illustrates the pinout for the RJ-45 connector and recommended TIA/EIA-568-B wiring.
Lists the factory default values for network, output, routing, and preset configurations.
Details the video and audio data blocks for various EDID profiles supported by the matrix.
Provides technical details on supported formats, connectors, operational parameters, and physical dimensions.
Alphabetical listing of topics and their corresponding page numbers for easy reference.
To Next Page
