Need help?Do you have a question about the Gefen EXT-HD-SL-444 and is the answer not in the manual?
General| Video Input Connector | HDMI |
|---|---|
| Video Output Connector | HDMI |
| Power Supply | 5V DC |
| Power Consumption | 15W |
| Operating Temperature | 0°C to 40°C |
| Resolution Support | 1080p Full HD, 1920x1200 (WUXGA) |
| EDID Management | Yes |
| Control Interface | RS-232, Ethernet, IR |
| Audio Support | LPCM, Dolby Digital, DTS |
| Control | RS-232, Ethernet, IR |
| Input Ports | Four HDMI |
| Output Ports | Four HDMI |
Lists crucial safety guidelines for product operation and maintenance.
Details the product's capabilities and functionalities.
Lists all items included in the product package.
Describes the front and back panel components and their functions.
Details the IR remote's top layout, buttons, battery installation, and channel setting.
Instructions for connecting sources, displays, and other devices.
Guides on setting up network connectivity with the Syner-G application.
Explains standby mode, powering on/off, and basic front panel/remote operations.
Covers routing inputs to outputs, saving, and loading presets.
Details matrix locking, IR extender usage, and menu system navigation.
Guides on adjusting picture quality and on-screen display configurations.
Covers HDCP settings and EDID management for signal compatibility.
Details network settings, web interface access, and control methods.
Guides for configuring RS-232, Telnet, and IP settings for control.
Details on configuring UDP protocol settings for network control.
Comprehensive list and explanation of available RS-232/Telnet commands.
Lists the factory default configuration parameters for the device.
Step-by-step instructions for updating the device's firmware via the web interface.
Technical details including resolutions, electrical, connectors, and physical attributes.
To Next Page
