Cleaning the Radiator Fins and Oil
Cooler Fins
WARNING
Wear required appropriate equipment
such as safety glasses and filter mask
when using compressed air, because
metal fragments or other objects can fly
and cause serious personal injury.
IMPORTANT: Be careful not to damage
the radiator fins and oil cooler fins when
cleaning them.
When using compressed air or
pressurized water, make sure the
pressure is no higher than 200 kPa (28
psi) and hold the nozzle sufficiently
away from the fins.
IMPORTANT: When using water, cover
the electrical system to prevent water
from getting in.
IMPORTANT: When operating the
machine in very dusty places, inspection
and maintenance should be performed
every day.
1. Open the rear door.
2. Blow compressed air on the radiator fins
and oil cooler fins to remove mud and dirt
stuck on them.
Replacing the Engine Oil and Oil
Filter
Refer to page 123, “Replacing the Engine Oil
and Oil Filter.”
Inspecting and Adjusting the Fan
Belt
Refer to page 125, “Inspecting and Adjusting
the Fan Belt.”
Cleaning the Condenser < CTL55
Option >
Refer to page 187, “Cleaning the
Condenser.”
Inspecting and Adjusting the Air
Conditioner Belt < CTL55 Option >
Refer to page 187, “Inspecting and Adjusting
the Air Conditioner Belt.”
Every 250 Hours
To Next Page
Loading...