Need help?Do you have a question about the Gehl CTL65 and is the answer not in the manual?
General| Engine Power | 74 hp |
|---|---|
| Operating Weight | 8, 818 lbs |
| Tipping Load | 8, 818 lbs |
| Engine Make | Yanmar |
| Number of Cylinders | 4 |
| Engine Model | 4TNV98 |
| Peak Torque | 221 lb-ft |
Covers fundamental safety rules, personal protective equipment, and hazard awareness.
Actions to take before operating the machine, focusing on the work area and machine readiness.
Steps and warnings related to safely starting the machine's engine.
Guidelines for safe operation, including visibility, load handling, and maneuvers.
Procedures for safely parking and securing the machine.
Safety measures to follow during inspection, maintenance, and repair activities.
Step-by-step guide for starting and stopping the engine, including cold weather procedures.
Explains lever patterns, warm-up procedures, and controls for machine movement and functions.
Details on prohibited operations, cautions during travel, and specific work methods like scooping and grading.
Schedule of maintenance tasks based on operating hours and required inspections.
Identifies symptoms of engine overheating and provides procedures for diagnosis and resolution.
Guidance for dealing with a dead battery, including jump-starting procedures.
Procedures for addressing issues after the fuel runs out, including bleeding the fuel system.
Information on fuse layouts and procedures for inspecting and replacing blown fuses.
Diagnoses and solutions for specific warning lamps that illuminate or flash during operation.
To Next Page
