Safety Bar
WARNING
Before leaving the operator’s seat,
raise the safety bar to engage the lock
and stop the engine.
If any controls are touched accidentally
when the safety bar is lowered, the
machine will move suddenly, and
cause serious injury or death.
Be careful not to touch the control
levers and pedal when lowering or
raising the safety bar.
This device is for locking the control levers,
pedal and selector, detent mode and high-
flow switches.
When the safety bar is lifted, the levers, pedal
and switches are locked.
Throttle Lever
This lever controls the engine speed.
(A) ............ Low idle
(B) ........... Maximum speed
Throttle Pedal
This pedal controls the engine speed.
(A) ............ Low idle
(B) ........... Maximum speed
Levers and Pedals
To Next Page
Loading...