Need help?Do you have a question about the Gehl CTL85 and is the answer not in the manual?
Essential safety rules, clothing, temperature, fire safety, and first aid kit guidelines for safe operation.
Steps to prepare before operating the machine, including checking the working area and machine cleanliness.
Guidelines for safe mounting, dismounting, clearing the area, and starting the engine properly.
Rules for safe operation, visibility, rider policy, body positioning, traveling, turning, and load handling.
Procedures for safely parking the machine, lowering attachments, and securing it before leaving.
Pre-operation checks, including mounting, dismounting, and walk-around inspections.
Step-by-step procedures for safely starting and stopping the engine, including cold weather operations.
Explains lever patterns, warming up hydraulics, and post-warm-up inspections for efficient operation.
Guidelines on prohibited operations, traveling, using the lift arms, bucket, and various attachments.
Overview of maintenance, cleaning, fuel, lubricant, and grease guidelines.
A schedule outlining maintenance tasks and their corresponding page references.
Daily inspection procedures performed before starting the engine, covering various machine parts.
Routine checks for coolant, engine oil, water separator, and fuel level performed every 10 hours.
Specific maintenance tasks for new machines during the initial 50 operating hours.
Identifies symptoms of overheating and provides procedures for diagnosis and correction.
Describes symptoms of a dead battery and provides instructions for jump-starting the engine.
Details the meaning of warning lamps and the recommended actions for each.
To Next Page
General