Operating Procedures
Prohibited Operations
WARNING
Do not operate on base rock (hard or
soft).
If you must operate the lift arms and
bucket while traveling, operate at
speeds slow enough so you have
complete control at all times.
Work should not be performed on a slope,
because the stability of the machine can
be reduced when operating the working
equipment and there is the danger of the
machine tipping over.
Keep the bucket as low as possible during
travel. Do not travel or attempt to change
directions with the bucket raised.
Travel at a speed that is appropriate for the
conditions. Travel at low speeds when the
field of view is obstructed, and take extra
precautions with hazardous materials.
Do not use this loader in areas where
there is danger of explosion from volatile
gases. Also avoid using the loader where
the exhaust gases could come in contact
with flammable items.
To Next Page
Loading...