Operating Procedures
Do not attempt a spin turn or pivot turn at
high speeds.
Doing so may cause extreme wear and/or
the tracks to come off.
Do not cut across a slope.
Doing so may cause extreme wear and/or
the tracks to come off.
Do not exceed the loader’s rated operating
capacity.
Do not use buckets or attachments that
exceed the loader’s operating capacity.
Do not use the downward force of the
bucket to drive piles.
Do not dig down deeply with the bucket.
Doing so could damage the bucket and
lift arms.
Hitting the bucket against rocks, etc.,
could damage the bucket or the bucket
cylinders.
To Next Page
Loading...
Need help?
General
