Gehl Dyna-Handler 562 - Hydraulic System Specifications

Hydraulic System
Type: Open center
Pump: Single section gear type
Displacement / revolution:
2.7 cu. in. (44.3 cc)
Flow @ 2500 RPM:
29 gpm (110 L/min)
Main relief pressure:
2800 psi (193 bar)
Steer relief pressure:
2000 psi (138 bar)
Main control valve:
Parallel, 3-spool block with
remote cable actuation
Frame level control valve:
Parallel, single spool block with
remote cable actuation
Hydraulic filter:
In-tank return type, 10 micron
media, replaceable element.
Rated flow: 100 gpm (379 L/min)
Rated pressure: 100 psi (690 kPa)
By-pass pressure (full flow):
25 psi (172 kPa)
Hydraulic strainer:
In-tank suction, 149 micron media,
replaceable element.
Rated flow: 50 gpm (189 L/min)
By-pass pressure: 3 psi (21 kPa)
PRINTED IN U.S.A. 5 907880/AP1298
Courtesy of CraneMarket.com