After Storage
After removing the machine from storage and
BEFORE operating it, perform the following:
1. Change engine oil and filter to remove condensa-
tion or other residues.
2. Wipe off grease from cylinder rods.
3. Lubricate ALL grease fittings.
4. Review and refamiliarize yourself with all safety
precautions as outlined in the SAFETY chapter of this
manual.
5. Follow the starting and warm-up procedures as
outlined in the OPERATION & ADJUSTMENTS
chapter of this manual.
907879/AP1198 50 PRINTED IN U.S.A.
Courtesy of CraneMarket.com
To Next Page
Loading...