GENERAL
PROBLEM
CAUSE
REMEDY
Loader Traction
or
Lift/Tilt
Oil Cooler restricted
or
NOT
function- Clean the Cooler
and
inspect it for
systems overheating.
ing properly and restricting air flow. damage, blockage
or
improper func-
tioning and contact dealer for addi-
tional directives.
Both Hydrostatic
Pumps
overloading. Traction
T-bar
being improperly
operated; refer
to
Operation section for
correct procedures.
Systems
Pump
overloading.
Lift/Tilt
T-bar
being improperly
operated; refer to Operation section for
correct procedures.
General operations sluggish.
Air in the Hydraulic system.
Purge
air; check Oil Level
Indicator
and replenish (if necessary).
Engine
NOT
responding
to
loads. Reset engine characteristic; see Engine
Manual.
Oil leaking somewhere in the system
Contact
dealer for additional
(possibly internally).
directives.
Lift/Tilt
system
NOT
respond- Engine / Systems
Pump
Drive Coupler
Inspect and contact dealer for addi-
ing
at
all. defective.
tional directives.
33
To Next Page
Loading...
