PRINTED IN U.S.A. 7 913218/CP0307
Chapter 3
CHECKLISTS
PRE-DELIVERY
The following Checklist is an important reminder of inspec-
tions that MUST be made before delivering the Telescopic
Handler to the customer. Check off each item after pre-
scribed action is taken.
Check that:
NO parts of machine have been damaged in shipment.
Check for such things as dents and loose or missing parts;
correct or replace components as required.
Battery is securely mounted and not cracked. Cable con-
nections are tight. Electrolyte at proper level.
Cylinders, hoses and fittings are not damaged, leaking or
loosely secured.
Oil, fuel and air filters are not damaged, leaking or loosely
secured.
All grease fittings have been properly lubricated and no fit-
tings are missing; see LUBRICATION chapter of this man-
ual.
Wheel nuts are torqued to 450 ft-lbs (610 Nm).
Tires are inflated to 70 psi (480 kPa) cold.
Hydraulic system reservoir, engine crankcase, engine
coolant, transmission and axles are filled to the proper
operating fluid levels.
All adjustments have been made to comply with the set-
tings given in this manual and in the separate engine man-
ual.
All guards, shields and decals are in place and securely
attached.
Model and serial numbers for this unit are recorded in
space provided on this page and page 1.
Check that:
All indicators (lamps, switches, etc.) function properly.
All hand and foot controls operate properly.
The PWP System operates properly (if equipped). Refer to
SERVICE AND STORAGE chapter for the procedure to
check the PWP System.
Boom, Quick-attach System with attachment tool and
frame level control all function properly.
No hydraulic system leaks when under pressure.
Listen for abnormal noises or vibrations; if detected, deter-
mine their cause and repair as necessary.
I acknowledge that pre-delivery procedures were performed
on this unit as outlined above.
Dealership’s Name
Dealer Representative’s Name
Date Checklist Filled Out
Machine Model # Machine Serial # Engine Serial #
DELIVERY
Check that:
The following Checklist is an important reminder of valu-
able information that MUST be passed on to the customer at
the time the unit is delivered. Check off each item as you
explain it to the customer.
Review with the customer the contents of this manual and
the AEM Safety Manual and for the following:
The Index at the back, for quickly locating topics;
The Safety, Indicators and Controls, and Operation and
Adjustments chapters for information regarding safe use of
the machine.
The LUBRICATION, SERVICE AND STORAGE chap-
ters for information regarding proper maintenance of the
machine. Explain that regular lubrication and maintenance
are required for continued safe operation and long life.
Give this Operator’s Manual and the AEM Safety Manual
to the customer and instruct them to be sure to read and
completely understand their contents before operating the
unit.
Explain that the customer must consult the engine manual
(provided) for related specifications, operating adjustments
and maintenance instructions.
Completely fill out the Owner’s Registration, including
customer’s signature, and return it to the Company.
Customer’s Signature
Date Delivered
Start the machine and test-run the unit while
checking that proper operation is exhibited by all
controls.
(Pages 5 and 6 have been removed at perforation)
To Next Page
Loading...
Need help?
General
