Gehl SL7600 - Page 73

Hydraulic System
Problem Possible Cause Remedy
Auxiliary
hydraulics do not
function.
Restraint bar is raised. Lower the restraint bar.
Spool lock solenoid
malfunctioning
Check electrical connections
to lock solenoid and repair
connections as needed. If still
not functioning properly,
contact your dealer.
Restraint bar or seat switch
malfunctioning.
Contact your dealer.
Load sense signal line loose
or broken.
Check line; tighten or replace
if necessary.
Load sense compensator not
functioning.
Contact your dealer.
High pressure compensator
on pump not functioning.
Contact your dealer.
High flow auxiliary
functions slowly.
Control linkage misadjusted. Check linkage, readjust for
full spool travel.
Low engine speed. Operate engine at higher
speed.
Hydraulic oil level low. Add oil.
Hydraulic oil viscosity is too
heavy.
Allow longer warming.
High flow auxiliary
does not function
Restraint bar is raised. Lower the restraint bar.
Spool lock solenoid
malfunctioning.
Check electrical connections
to lock solenoid and repair
connections as needed. If
still not functioning properly,
contact your dealer.
Restraint bar or seat switch
malfunction.
Contact your dealer.
Load sense signal line loose
or broken.
Check line; tighten or replace
if necessary.
Load sense compensation
not functioning.
Contact your dealer.
High pressure compensation
on pump not functioning.
Contact your dealer.
908274/BP1202 70