5.2 V
PS_Gb_01243_130717.doc 5.2
5.2 Maintenance
5.2.1 Preventive maintenance schedule
ELEMENTS TYPE OF OPERATION
FREQUENCY
Ref.
Before
every use
After
every use
Once a
week
After
2 h
First
fortnight
or 5 h
1 month
or 10 h
or 25 h
In case of
deterioration
As
required
The whole machine
Machine inspection
X
Chap.3 - § 2
Give a general clean
X
Chap.5 § 1.3
Engine cover Clean
X
Chap.5 § 1.5
Protective sleeve Replace
X Chap.5 § 1.11
Control elements Check operation
X
Chap.3 § 2
screws
Re-tighten
X
X Chap.5 § 1.4
Engine
Inspection
X
Chap.5 § 1.2
Air filter
X X Chap.5 § 1.8
Oil change
X
X Chap.5 § 1.2
Carburettor
Check that tip does not
vibrate at idling speed
X
Chap.5 § 1.6
Adjust settings
X Chap.5 § 1.6
Tip
Check
X
Chap.4 § 2
Replace
X X Chap.5 § 1.10
Engine coupling Replace
X Chap.5 § 1.12
Shaft bearing Replace
X X Chap.5 § 1.13
NB: These recommendations are not limitative. Permanent surveillance of the machine and well-organized preventive servicing will most certainly extend the
machine’s service life.
Indications given in this preventive maintenance schedule apply to normal operation. For more difficult conditions and longer working days, the frequencies
given must be reduced correspondingly.