EasyManua.ls Logo

Geko G80405 - User Manual

Geko G80405
23 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
G80405
BH-20R3
BG
Керамичен електрически калорифер
Превод на оригиналното ръководство
Electric ceramic fan heater
Translation of the original Operating Instructions
EN
BG
ВНИМАНИЕ!
Моля, прочетете това ръководство преди употреба и го запазете за бъдеща употреба.
IMPORTANT INFORMATION!
Read before use and retain for future reference.
EN
Произведено за: / Made for:
GEKO Spółka z ograniczoną odpowiedzialnością Sp.k.
Kietlin, ul. Spacerowa 3,
97-500 Radomsko
geko@geko.pl
www.geko.pl
2kW керамичен електрически нагревател

Table of Contents

Questions and Answers

  • J
    Jasmine GuerreroAug 12, 2025
    Why is my Geko Heater only blowing air and not heating?
    • E
      Ernest MorrowAug 12, 2025
      If your Geko Heater isn't heating up and only the fan is running, it could be due to several reasons. First, the thermostat might have tripped; try turning the thermostat knob until you hear a click, which indicates it's switching on. If there's no click and the thermostat appears undamaged, the heater should automatically turn on once it cools down. Another possibility is that the cut-off protection has tripped. To resolve this, turn off the heater, inspect the air inlet and outlet for any blockages, unplug the power cord, and allow at least 10 minutes for the protection to reset. Finally, ensure the switch is set to heating mode and not just the fan position.
  • S
    Sara HardingAug 19, 2025
    What to do if my Geko Heater doesn't turn on?
    • S
      Susan GouldAug 20, 2025
      If your Geko Heater isn't working after plugging it in and turning it on, the issue might be with the electrical connection. First, check that the plug is securely connected to the socket. If the connection seems loose or unsuitable, try adjusting it. If the plug is correctly connected, verify that the socket has electricity by plugging the cord into a working outlet.
  • J
    Jennifer EdwardsAug 27, 2025
    How to fix reduced airflow in Geko Heater?
    • C
      Cody BanksAug 27, 2025
      If you notice reduced airflow from your Geko Heater, it could be due to a dirty air duct. Try unblocking the air duct to improve airflow. Alternatively, a damaged engine could be the cause, in which case the device should be repaired by a qualified service technician.
  • H
    Heather DelgadoSep 3, 2025
    What causes a Geko Heater's engine to not run, even when the heaters are warm?
    • R
      Rose ReyesSep 3, 2025
      If the engine of your Geko Heater does not run, but the heaters are warm, this could be due to a damaged engine, in which case the device should be repaired by a service technician. Alternatively, the fan might be blocked. Try unblocking or cleaning the fan to resolve this issue.

Geko G80405 Specifications

General IconGeneral
Power SourceElectric
Voltage220-240 V
Frequency50 Hz
Heating Area20 m²
Safety FeaturesOverheat protection