14
Translation of the original Operating Instructions
MEANINGS OF THE WARNING SIGNS ON THE DEVICE
Be careful when using the heater. To facilitate and remind the most important safety rules during
work, stickers in the form of pictograms have been placed on the device. The meanings of the
signs are explained below.
HEATER USAGE
Avoid other threats. PLEASE READ
INSTRUCTIONS BEFORE USING.
The product complies with the essential
requirements of European Union directives.
Note / warning
Do not dispose of this device or any of its parts
in household waste.
The device is intended for use in circuits
where, for protection against electric shock,
it is necessary to connect the PE protective
conductor or other equipotential bonding
conductor to the protective terminal of the
device.
IPX0
Waterproof class IPX0 - no protection against
water. Use only indoors.
WARNING! In order to avoid overheating,
do not cover the heater. There is a risk of
overheating and re.
Connection of the heater to the electric network
1. The heater must be placed on a stable, even surface free from obstacles and at least 1m from
walls or combustible materials.
2. Connect the plug to a power outlet.
3. Turn on the device using the multiple switch:
- Switch position - Power is O
- Switch position - Fan Runs - No Heating
- Switch position - Half Power Heating (1000W)
- Switch position - Full Power Heating (2000W)
4. Use the thermostat knob to set the desired temperature:
- The device will stop heating when the set temperature is reached
NOTE. When using the fan heater for the rst time, hot parts may smell dierently. The heating element
is made of stainless steel and was coated with protective oil during production. The smell is caused by
the heating of the residual oil, it is not hazardous to health.
To Next Page