Gelmar StarBox Slimline User Manual

DIY Installation Guide
Slimline
(The system does not include the drawer back & base)
Assembly & Installation of StarBox
Mounting Front Fixing Brackets
Tighten the
xing screw after
installing the panel.
Press the upper pin
into the panel after
you installing the
panel.
Removing Front Panel
Take o the plastic cover
Take out the
upper pin
Take o the plastic cover
Take out the
upper pin
Front panel height
adjustment: ±2mm
Front panel
side adjustment: 1mm right
Front panel
side adjustment: 1mm left
Mounting the drawer
Installing the drawer
Removing the drawer
Push the metal spring away from
the panel and pull out
Function of the damper

Gelmar StarBox Slimline Specifications

General

Brand	Gelmar
Model	StarBox Slimline
Category	Indoor Furnishing
Language	English

Summary

Assembly & Installation of StarBox

Mounting Front Fixing Brackets

Steps for attaching front fixing brackets to the drawer system.

Installing the Drawer

Procedure for inserting the assembled drawer into the cabinet.

Removing Front Panel

Steps to detach the front panel from the drawer.

Removing the Drawer

Instructions for taking the drawer out of the cabinet.

Front Panel Adjustments

Guides for fine-tuning the drawer front position.

Function of the Damper

Explanation of the damper mechanism's operation.

Mounting the Drawer

Steps for assembling the drawer components.

Installation Instructions

Runner Installation

Details on how to install the drawer runners.

Slimline Drawer Specifications

Technical dimensions for 88mm and 171mm drawer variants.

Bottom and Back Panel Measurements

Specifications for fitting bottom and back panels to the drawer.