RIGHT CONTROL LEVER
The right control lever contains the hazard signal switch, and the windshield
wiper and washer switches (if equipped).
HAZARD SIGNAL SWITCH
Press the tip of the lever inward
q
to
cause all turn signal lamps to flash
simultaneously. Use this feature to
alert others of an emergency or other
situation requiring caution, especially if
your vehicle becomes disabled on or
near a road. Press the switch again to
cancel the hazard signals.
WINDSHIELD WIPER
Rotate the knurled barrel
q
forward
to turn the windshield wipers on. Pull
the control lever toward the driver’s
seat to activate the washer (if
equipped).
If the wiper fails to work, check for a
blown fuse at the fuse block. See
page 60.
CAUTION
A worn or damaged wiper blade could impair operator vision and result in an
accident. A worn wiper blade could also damage windshield glass. Always
replace worn or damaged wiper blades promptly.
23
FEATURES AND CONTROLS
To Next Page
Loading...
