GEM e2 2018 - Fuse and Relay Recommendations

blown fuse, then replace the fuse. If you suspect a relay or diode needs
replacement, your authorized GEM dealer can assist.
Open the hood to access the fuse box
q
. See the label attached to the fuse box
cover for the function and amp rating of each fuse.
WARNING
Before servicing the vehicle’s electrical system, always disconnect the main
power connector first, then disconnect any electrical accessory connections,
then disconnect the negative cable from the 12-volt battery (if equipped), then
disconnect the negative terminal from the main battery pack. See page 32.
FUSE AND RELAY RECOMMENDATIONS
STANDARD 12V FUSES
APPLICATION SIZE LOCATION
Drive; Constant;
Internal Lighting
5 amp
12V Fuse Center
Horn; Display 10 amp 12V Fuse Center
Wiper; ACC; Lights 15 amp 12V Fuse Center
VCM 20 amp 12V Fuse Center
Chassis 30 amp 12V Fuse Center
OPTIONAL 12V FUSES
APPLICATION SIZE LOCATION
Lithium-ion 5 amp Lithium-ion Harness
Beacon Light 7.5 amp Beacon Harness
Security Light
7.5 amp
Security Light Harness
Stereo 10 amp Stereo Harness
EPS 30 amp EPS Harness
61
MAINTENANCE