LAMP INDICATES CONDITION
High Beam
This lamp illuminates when the
headlamp switch is set to high
beam.
Seat Belt
When the key is turned on, the
seat belt indicator lamp will
illuminate if the driver’s seat belt
is not fastened. The lamp is a
reminder to the operator to
ensure all riders are wearing seat
belts before operating.
BRAKE SYSTEM
ITEM
SOLUTION
Park brake
Release the park brake.
Brake fluid level
If low, add brake fluid. See page 59.
Brake system
Check hoses for cracks, scuffs and worn spots. If you
discover signs of wear or damage, do not operate the
vehicle. Your authorized GEM dealer can provide
service.
WARNING
Worn or damaged brake hoses can cause brake failure. Always have worn or
damaged brake hoses replaced promptly.
27
FEATURES AND CONTROLS
To Next Page
Loading...
