GEM eM 1400 - Dumping the Cargo Box

33
OPERATION
Dumping the Cargo Box
1. Select a level site to dump the cargo box. Do not attempt to dump or unload the vehicle
while parked on an incline.
2. Apply the brakes.
3. Set the park brake.
4. Place the direction selector in neutral.
5. Dismount the vehicle.
6. Ensure that the cargo is positioned evenly or toward the front of the cargo box.
WARNING! If the weight distribution on the box is located toward the rear of the box when using the
release lever, the box may dump unexpectedly when the lever is pulled and cause serious injury to the
operator or bystanders. Never operate the dump lever without ensuring that the load is positioned
evenly or at the front of the box.
7. Release the tailgate latches and lower the tailgate.
8. Using Electric Switch: Press and hold the top of the dump box switch to dump the cargo.
Release the switch after the cargo has dumped or when the box reaches the fully elevated
position, indicated by a ratcheting sound. Press and hold the bottom of the dump box
switch to lower the cargo box. Release the switch when the box is fully seated on the
frame, indicated by a ratcheting sound.
Using Release Lever: Stand clear of the cargo box and pull the release lever. Lift the
front of the cargo box to dump the cargo. Lower the cargo box and push down securely
to latch. Make sure the box is fully seated on the frame before operating the vehicle.
9. Close the tailgate and secure both tailgate latches.
WARNING! Operating the vehicle while the cargo box is raised could result in severe injury. The box
could close unexpectedly and cause injury to the driver or passenger. The rear tires will also catch the
rear of a raised box, damaging the vehicle and creating hazardous driving conditions. Never operate
this vehicle with the cargo box in the raised position.