GEM genesys s Manual Addendum

1234
TAP TEMPO
1234
TAP TEMPO
1234
TAP TEMPO
assign an user scale to a pad
Page13
manual addendum genesys s
Press the EDIT button in the programmable pads
section. The edit page is shown on the display.
2
Select a PAD to assign the USER scale using the UP/
DOWN CURSOR. (the pad n.4 in this example)
3
Once you have selected the PAD, assign the SCALE
function by rotating the DIAL
Pressing now the PAD n.4 you realtime recall the temperament
you have programmed in the USER scale 1.
The programmable pad set up can be stored in one of the internal MEMORIES or handled in realtime enabling
the LOCK function [F8]. Please refer to the relative section in the owner manual.
Assign the USER SCALE to a Programmable Pad
1 5
select the PAD n. 3 with the CURSOR, assign
the SCALE OFF function by rotating the DIAL
Now it is possible to select another pad to assign
a different USER scale or the SCALE OFF function,
to restore the normal temperament during your
performance
Pressing the PAD n.3 (SCALE OFF) you restore the normal
temperament (EQUAL).
4
Moving on the next fi eld (USER 1) using the RIGHT
CURSOR you can select the USER scale memory to
assign to the PAD. (USER scale location from 1 to 8)

GEM genesys s Specifications

General

Brand	GEM
Model	genesys s
Category	Synthesizer
Language	English