the midi set up
Page14
manual addendum Genesys s
1
2
4
3
MIDI Out
MIDI In
The MIDI set up
The MIDI Set Up is a function to simplify to the Genesys s the connection of an external MIDI device (digital piano or accordion).
1
Connect your MIDI controller MIDI Out to the Genesys s MIDI In
2
Press the MIDI button on the panel, then the function button [F5] COMMON/ARRG.
3
Select the field MIDI SET UP using the CURSOR DOWN. The default value of this parameter is OFF
(disabled). By rotating the DIAL you can select: PIANO, ACCORDION 1 and ACCORDION 2 set up.
ACCORDION 1
Enable the COMMON channel N.1 and the CHORD channel 2. This set up allows the following performance,
related to the KEYBOARD MODE pad selection. The BASS/SPLIT and MANUAL/BASS modes are properly
fi tted for a MIDI accordion.
SELECTING BASS/SPLIT
Enabling the accordion set up 1 the BASS/SPLIT mode allows to play your accordion in real time, (without
the arrangements), playing the current preset in the right hand keyboard, while the left hand can play the
bass in the fi rst two line of buttons, and the chord in the remaining lines of buttons.
With this set up it is possible to use the DRUMS track of each style, performing the accordion keyboards in realtime.
LEAD
Play the selected
PRESET
BASS
Play the BASS sound
recalled by the se-
lected PRESET
CHORD
The chord play
the chord sound
recalled by the se-
lected PRESET
PIANO
Enable the COMMON channel N.1. In this way it is possible to control the realtime functions of the Genesys s
(presets, styles, memories etc.) using an external MIDI keyboard, like a digital piano, by transmitting on a single
MIDI channel (N. 1 in this set up).
MIDI Out
MIDI In
To Next Page
Loading...
Need help?
General
