Need help?Do you have a question about the Gemini 7201 and is the answer not in the manual?
Overview of the Gemini 7201 compact alarm system for vehicles.
Lists core functions like dynamic code, siren, door locking, and memory.
Connect wiring harness, including 4-pin for ultrasonic and 2-pin for LED, after disconnecting battery.
Connect power feed to battery positive and earth to vehicle frame for installation.
Install alarm in engine compartment and position ultrasonic heads at windscreen pillars.
Test system inlets and outlets using dip-switch N.4 and transmitter buttons.
Arm and disarm the system using transmitter button 1, indicated by lights and sound.
Control panic, siren exclusion, and chirp signals using transmitter buttons and ignition key.
Add new transmitters by setting dip-switch N.6 ON and following ignition key sequence.
Deactivate ultrasonic sensors and stop window closure within 25 seconds of neutral time.
Interpret LED flashing patterns to identify the cause of an alarm trigger.
Lists active functions and indicates transmitter battery low status via LED.
The 5123 ultrasonic module detects door openings and movements within the vehicle cabin.
Adjust sensitivity to minimum by lowering window, then increase as needed based on LED feedback.
The 7059 sensor detects intrusion via electromagnetic field reflection for passenger compartment security.
Adjust 7059 sensor sensitivity using control, aided by a RED LED indicator, and connect via harness.
Fit the 7059 sensor centrally, with the TOP side (TRIMMER/LED) facing the interior of the passenger compartment.
Technical specifications for the 7059 sensor, including frequency, temperature, voltage, and current.
Illustrates wiring for main system components including indicators, sirens, and switches.
Shows how to connect the 2344 module to the 7201 alarm system, detailing specific wire connections.
Illustrates wiring for connecting the 7147 siren to the 7201 alarm system, specifying wire connections.
Wiring for positive/negative common central locking for specific car makes and models.
Wiring for central door locking using compressor control for specific Audi and Mercedes models.
Wiring for central door locking on Renault Twingo (<99) using original door lock switch.
Wiring for central door locking for several Honda, Hyundai, and Galloper models.
Wiring for central door locking on Daewoo Nexia and Opel Frontera (<99) models.
Wiring for central door locking and comfort functions on various BMW models.
Wiring for central door locking and comfort systems on Audi 100 and Mercedes (<96).
Wiring for central door locking and comfort for Audi A4/A6 (<96), Opel Vectra (<96), Omega.
Wiring for central door locking, comfort, and open functions on SEAT TOLEDO (<96) using diodes.
Wiring for central door locking (positive/negative common) for Audi, BMW, Opel, Skoda, VW models.
Wiring for central door locking on Nissan Micra (>97), Primera, Subaru Forester, Suzuki Ignis, Jimmy.
Wiring for central door locking on Citroen XSARA, XANTIA, Fiat Ulisse (98), Lancia Z (98), Peugeot models.
To Next Page
General