5.Listen to radio
Turn on FM radio stations
Make sure that you have connected and fully extended the supplied FM antenna.
Instructions:
1. Insert the FM Antenna Cable to the FM ANT jack on the rear panel.
2. Press FUNCTION button on the Top Control panel or press FM key on the remote control to switch
to FM mode.
3. Once switch successfully, the FM indicator light will light on.
4. Press key on the top control panel or on the remote control to search and save the radio
stations automatically.
5. Press / to select programmed radio stations.
6. Connect with Bluetooth
Instructions:
1. Press button or “FUNCTION” button on the top control panel or press BT button on the remote
control to switch to the BLUETOOTH connect mode, (bLUE) will be displayed on the display screen.
2. Open the Bluetooth on your external device (must have Bluetooth function), and the name
“AIO003OI20” will show on the external device, please try to connect it.
3. Once connected, you can hear a small sound from the speaker.
4. You can use the or key on the top control panel to control the tracks of the external
device.
Note: This speaker do not need the password.
7.Connect with AUX Line in
Instructions:
1.Press “FUNCTION” button on the top control panel or press AUX key on the remote control to switch
to the AUX mode,
2.(AUH) will be displayed on the display screen and the AUX indicator light will light on if switch
successfully.
3.Connect this speaker to AUX inserting jack and the external device Earphone jack by provided AUX
cable;
4.Once connected,turn on your external device music
5.You can use or button on the Top control panel to control the tracks of the external device.
Caution: Please turn off the unit before connect AUX cable in order to avoiding unexpected noise.
To Next Page
Loading...
Need help?
General
