To Next PageTo Next Page
Need help?Do you have a question about the Gemini PS-626EFX and is the answer not in the manual?
Audio Specifications| frequency response | 20 Hz - 20 KHz +/- 2dB |
|---|---|
| distortion | <0.02% |
| S/N ratio | Better Than 85 dB |
Power| power source | AC 15v 500mA |
|---|---|
| max output | 20 V Peak-to-Peak |
| rec output | 225 mV, 5 KOhm |
Inputs| phono input | 3 mV, 47 KOhm |
|---|---|
| line input | 150 mV, 27 KOhm |
| mic input | 1.5 mV, 1 KOhm Balanced |
Headphone Specifications| headphone impedance | 8 Ohm |
|---|
Weight and Dimensions| unit dimensions | 10” x 3.3” x 12” (254 x 84 x 304 mm) |
|---|---|
| unit weight | 6.5 lbs (2.94 kgs) |
Covers essential reading, warnings against opening the unit, and general handling advice.
Addresses ventilation, location, power sources, water exposure, and heat.
Details on grounding, polarized plugs, power cord protection, and lightning.
Guidelines for cleaning, attachments, servicing, replacement parts, and damage.
Welcome message and overview of the Gemini PS-626EFX mixer.
Lists the main capabilities of the 10" 3 channel stereo mixer with effects.
Advice on handling, cleaning the unit, and avoiding damage during transit.
Warnings regarding direct sunlight, moisture, and spray cleaners.
Instructions for connecting the unit's power supply.
Details on connecting master and record RCA outputs.
Guide to phono/line inputs, grounding screw, and microphone input.
Information on connecting headphones for monitoring.
Adjusting microphone signal volume and frequency response.
Selecting audio sources (Phono/Line) for each mixer channel.
Adjusting the signal level for each individual channel.
Tone control for each channel using low, mid, and high frequencies.
Controlling the output volume for each specific channel.
Settings for crossfader reverse functionality and curve.
Mixing audio between channels using the crossfader.
Sending individual channel signals to the effects section.
Monitoring output levels and mixing cue with master output.
Adjusting the overall volume of the main output.
Adjusting the volume for the headphone monitoring output.
Selecting which channel to monitor in the headphones.
Using effects and adjusting parameters with the jog wheel.
Utilizing the filter effect to adjust high and low frequencies.
Applying the flanger effect to create depth and sound modification.
Using the transformer effect to control volume dynamics.
Step-by-step guide for replacing the crossfader.
Details on phono, line, and microphone input characteristics.
Details on maximum and record output levels.
Includes frequency response, distortion, power, dimensions, and weight.
Details coverage, exclusions, and limitations of the product warranty.
Instructions for initiating returns and service requests.
Addresses and phone numbers for customer service in various regions.
