ARP_ARG Rev03 05-2013 pag. 59
8.2.3 – CLEANING THE OUTSIDE OF THE APPLIANCE
Carry out this operation whenever necessary.
APPLIANCE STATUS:
- ON/OFF button on OFF ( on the display);
- power supply plug disconnected from the mains.
AUTHORIZED PERSONNEL
Appliance operator.
METHOD
Clean the outer surface of the appliance (steel base and panelling), using a non-abrasive sponge soaked in neutral
detergent. Rinse with a sponge soaked in water and dry with a clean cloth.
Use exclusively water and non-abrasive neutral detergent for cleaning. The use of different
products could damage the surface of the appliance and compromise the quality and healthiness of
the product being processed.
Do not use abrasive sponges.
When cleaning do not use cloths that leave lint.
To Next Page
Loading...
