BCB US Rev.00 01-2019 pag. 9
1.6 – SAFETY DEVICES
Personnel exposed to the hazards inherent in moving parts are protected by special safety devices on the appliance.
− grilles covering the cooling fans (ref. 1 fig. 2);
− grilles covering the condenser unit (ref. 2 fig. 2).
The appliance is also provided with devices to protect the food during processing. Below is a list of the safety devices on
the appliance.
− Sensor reads and signals door opening. If the doors remains open for a presetted time, it will appear on the
display the message “ id ” combined with a acoustic alarm and the compressor will switch off.
− Sensor (ref. 3 fig. 2) located on cooling circuit signals any overheating of the equipment and places the machine
on standby.
− Differential magnetothermal overload relay for compressor protection: only in three phase equipment.
To Next Page
Loading...
