TECHNICAL SPECIFICATIONS
Measuring Range: 0-25mm/0-1”
Precision Accuracy: 0.01mm/0.0005”
Power: LR44 Alkaline Battery (Or 357 Silver Oxide)
Environmental Conditions
Temperature: 0ºC-40ºC
Relatively Humidity: ≤80%
Storage Temperature: -10ºC– +60ºC
FUNCTIONS
1. Power ON/OFF – Press the ON/OFF button to activate or
deactivate the gauge.
2. Zero Adjustment Setting – Press the “O” button while the
unit is on.
3. Millimeter/Inch Conversion – Press the “mm/in” button to
switch between measuring modes.
BATTERY REPLACEMENT
If the LCD display flashes its digits on and off this is an
indication that the batteries are weak and in need of
immediate replacement. On the backside of the gauge
nearest the LCD display, locate the small screw and carefully
unscrew it to remove the battery compartment cover and
replace the battery (positive side facing up). Replace the
battery compartment cover.
To Next Page
Loading...
Need help?
General