Specifications (cont.):
Charge Profile:
Multi-Stage
with Temperature
Compensation
CC-CV
CC/CV or
Multi-Stage
Bulk Voltage: 14.4 V –
Absorption Voltage: 14.2 V –
Absorption Time: 2 hours –
Float Voltage (Pb models) or
CV Voltage (Li models):
13.5 V 10.5 V 12.5 V 14.2 V 16.7 V
Custom
Voltage
Re-Absorb (Re-Bulk):
4
12.5 V –
Load Disconnect (LVD)/Reconnect Voltage: 11.4 V / 12.5 V 8.2 V / 9.0 V 9.3 V / 10.5 V 11.0V / 12.0 V 12.4 V / 14.0 V Custom Voltage
Battery Temperature Compensation:
-28 mV/°C
(referred to 25 °C)
Disabled
Operating Temperature: -40 °C – 85 °C
Max Full Power Operating Ambient:
5
45 °C
Connection:
6-position terminal block for 12 – 30 AWG wire
Weight:
6
2.8 oz (80 g)
Dimensions:
6
4.3" x 2.2" x 1.14" (11 cm x 5.6 cm x 2.9 cm)
Environmental Protection:
6
IP40, Conformal Coating, Nickel-Plated Brass & Stainless Hardware
Certifications: CE, FCC, RoHS
Warranty: 10 years
Copyright © 2021 Sunforge LLC. All rights reserved. Changes are periodically made to the information herein which will be incorporated in revised editions of this publication. Sunforge may make changes or
improvements to the product(s) described in this publication at any time and without notice.
(4) If the battery voltage drops below this point, the controller will attempt to run an absorption cycle. Otherwise, it will charge to the oat voltage.
(5) Max ambient temperature for full operating power. Test conditions: 16 V input, 13 V output, GV-5 vertically (wall) mounted.
(6) This specication does not apply to GV-5-PCB. Specications for the GV-5-PCB are as follows: Weight: 0.8 oz (23 g); Dimensions: 3.3" x 1.9" x 0.9" (8.3 cm x 4.8 cm x 2.3 cm); Environmental Protection: IP00.
Pb-12V Li-10.7V(-SP) Li-CVLi-12.5V Li-16.7VLi-14.2VMODEL (GV-5-**)
To Previous Page
Loading...
Need help?
General
