To Next PageTo Next Page
Need help?Do you have a question about the Gendex ORTHORALIX 9200 DDE and is the answer not in the manual?
General| Brand | Gendex |
|---|---|
| Model | ORTHORALIX 9200 DDE |
| Category | Medical Equipment |
| Language | English |
Details the purpose of the manual and the proper use of the equipment.
Explains notes, cautions, and warnings used throughout the manual.
Lists registered and unregistered trademarks associated with the product.
Identifies and describes the main parts of the Orthoralix 9200 DDE system.
Provides a guide to the location and meaning of various labels on the equipment.
Lists and describes optional accessories available for the system.
Outlines measures and procedures for radiation safety during operation.
Details electrical, mechanical, explosion, and laser safety guidelines.
Covers anatomical reference indications and safety for tubehead oil.
Provides information on the correct disposal of the equipment.
Guidelines for cleaning the system and caution regarding disinfectants.
Step-by-step instructions for powering on the system.
Instructions for safely powering down the system and computer.
Procedure for installing and releasing the CCD sensor module.
Details the power switch and the main control panel interface.
Explains how to select imaging projections and patient sizes.
Describes the functionality and selection of the AEC mode.
Information on adjusting kV, mA, and exposure time settings.
Covers controls for headrest and imaging assembly height adjustments.
Explains the laser control, reset function, and demo mode.
Details the controls specific to the cephalometric function.
Instructions for setting the primary collimator for different projections.
Describes the exposure handswitch and system status icons.
Information on the GX driver icon in the system tray.
Steps to prepare the system for a standard panoramic exposure.
Guidance on patient positioning and head adjustment.
Procedure for initiating and completing the exposure.
Description and operation of the child panoramic projection.
Details on orthogonal dentition and half-dentition projections.
Covers left/right half-jaw panoramic and TMJ projections.
Information on maxillary sinus projections (frontal and lateral views).
Troubleshooting steps for distorted panoramic images.
Guidance on correct patient positioning to prevent image errors.
Recommendations for data backup and minimum system hardware.
Details on user programs, system messages, and alarms.
Troubleshooting DMU, connection, transfer, and host status errors.
Steps to prepare the system for cephalometric imaging.
Guidance on patient positioning for various cephalometric views.
Procedure for making cephalometric exposures.
Instructions for adjusting the soft tissue filter for cephalometric imaging.
Introduction to Transcan projections and the positioning device.
Details on using templates for aligning dentition impressions.
Procedure for Transcan projection and alignment steps.
Steps for preparing the system and patient for Transcan imaging.
Procedure for completing the Transcan exposure.
Instructions on how to activate and use the AEC mode.
How to view AEC corrections and change technique factors.
Explains the multi-room function, terms, and preliminary setup.
Details system icons and procedures for taking control.
How to inspect network status via the main tab.
