Need help?Do you have a question about the Gendex 765DC and is the answer not in the manual?
General| X-Ray Tube Current | 7 mA |
|---|---|
| Focal Spot | 0.8 mm |
| Type | Intraoral X-ray unit |
| X-Ray Tube Voltage | 60 kV to 70 kV |
| Exposure Time Range | 0.02 - 2.5 seconds |
Overview of the main physical parts of the intraoral x-ray system, including suspension, control, tubehead, and cone.
Guidelines for safe operation concerning radiation exposure for patient and operator.
Rules for safe electrical installation and maintenance, including grounding and liquid ingress.
Precautions against using flammable or explosive substances near the equipment.
Warnings about trapping body parts or clothing in moving components.
Details on specific buttons, lamps, and switches for system operation and exposure initiation.
Instructions for powering on, selecting settings, positioning, and initiating X-ray exposure.
Procedure to adjust system settings for D, E, or F-speed dental film.
Steps to configure the system for digital imaging systems like DenOptix or CCD sensors.
Setting the default imaging type or patient selection upon system startup.
Notes that 12" cone adjustment requires a service agent.
Technical details of the tubehead, including potential, current, radiation, focal spot, and heat storage.
Details on cone size, X-ray field size, and focal spot to distal end distance.
Nominal voltage, tolerance, and useful range for power supply.
Accuracy specifications for tube potential, current, and exposure time.
Outlines recommended system checks and suspension arm maintenance intervals.
To Next Page
