CONNECTING ROUTER
Warning: Check that the power connector is wired according
to the instructions for connecting power supply.
* Connect GSM antennas to the router. Make sure that antennas are well
tightened (however, don't use too much force in order not to damage
antenna connector on the router).
* Plug power connector into power port on the router. Green power
indicator will turn on
* Wait approximately 45 seconds for the router to become fully operational
* Plug one side of Ethernet cable to Ethernet port on the router
* Plug the other side of Ethernet cable to Ethernet port on the computer.
1
2
3
5
To Next Page
Loading...
Need help?
General